Log-iQ Energy System: inteligentní systém pro řízení energie
Are you paying for rated power input, which you will hardly use?
and reduce your fixed energy payments.
operation according to DIN 18875
Your problem
On your electricity bill, you pay for two things. On one of them You are losing money unnecessarily.
You'll only slightly influence consumption (how much you actually cook). But the reserved power input, the capacity you must pay for the most demanding moment of the day, you pay for fixedly every month, even if you don't use it most of the time. And if you briefly exceed it, penalties follow.
Small savings | Consumption (kWh)
What will you actually cook?
You're really saving here | Reserved power (kW)
Capacity that you pay for a few minutes of peak time
When kettles, induction cookers, the dishwasher, and the ventilation system all turn on at once before lunch, the peak load spikes. This peak determines the fixed charge and any penalties for exceeding the 15-minute maximum.
It's like a highway.
You pay for road width, not for the number of cars. Building six lanes for five minutes of morning rush hour is expensive. If you spread out departures, three lanes will suffice, and everyone will arrive at the same time. Log-iQ Energy System will break down the „operation“ in your network.
What's different about this
We are not improving one appliance.
We manage the company's entire operations.
01
Measures consumption
It tracks the actual consumption of each connected device over time – not estimates, real data.
02
Manages priorities
Podle nastaveného algoritmu, případně Vaší prioritizace prostřídá na krátké okamžiky zátěž a srovná nárazové vrcholy.
03
Holds the tip
It will maintain the overall peak below the contracted maximum. This is without penalties and without unnecessarily high power consumption.
What do you have under control
Full operation
on one system.
From consumption measurement and device control to the operating environment itself. Everything in one place, in Czech, and with online access from anywhere.
Cooking without compromise
Software developed for professional operations, not just kitchens. The preparation of dishes itself is not limited in any way.
Full touch operation
Ovládáte ho z přehledného
dotykového displeje přímo na místě.
You'll use what you already have
Patentovaný Modul Log-iQ Energy Module připojí jakékoli elektrické zařízení s příkonem od 2 kW bez výměny vybavení.
Standard, no improvisation
Systém komunikuje s regulovanými zařízeními podle normy DIN 18875, spolehlivě
a bezpečně.
System in Czech
Uživatelskému rozhraní rozumí
celá obsluha bez jazykové bariéry.
Remote control
You connect to the control system online, from anywhere.
It doesn't extend time.
Logika každého jednoho zařízení stále
funguje (teplotní sonda, ventilátor,
osvětlení atp.)
Do you know the consumption of individual devices
Direct measurement on the timeline will show how much energy each device consumes and when. No estimates from the bill.
Norma DIN 18875 dodržena
Systém komunikuje s regulovaným zařízením
dle normy DIN 18875: Zařízení pro komerční kuchyně - rozhraní pro optimalizaci výkonu.
Without penalties for exceeding the maximum
Chcete vědět, jak je
na tom váš provoz?
Použijte naši kalkulačku a spočítejte si vaši měsíční a roční úsporu s použitím regulátoru Log-iQ Energy System. Výpočet pracuje se snížením energetické špičky o 60 %. Výpočet je pouze orientační. Přesná čísla dostanete po auditu, který Vám zpracujeme.
The calculation uses the 60% peak reduction. The exact savings depend on your rate plan and usage.
Realizace 100+ projektů
Reference Projects
We have already implemented over 100 projects in the Czech Republic. The values listed below are real numbers from actual operations. Now imagine what savings you could achieve by installing the Log-iQ Energy System. Do you already know what you would use them for?
Patented technology.
Developed in the Czech Republic.
From analysis to long-term care
We'll start right with you. Together with you, we'll conduct detailed measurements and evaluations of your electricity consumption. This will allow us to precisely determine your current performance and prepare a list of our equipment that we will perfectly tailor to your needs and power peaks.
However, our cooperation doesn't end with the delivery of technology. Our service program includes professional commissioning of equipment, regular maintenance, and fast and reliable service. We will ensure that your kitchen always operates at full capacity, without compromise and without worries.
Energy saving
up to 5%
Saving energy goes hand in hand with being environmentally friendly.
Cost reduction
Significant savings
Lowering fixed monthly payments.
Elimination of exceeding the 15-minute maximum.
Satisfied customer
Building long-term trust
From analysis, savings design, technology, training, to service.
We will gladly answer them for you
Frequently Asked Questions,
which you are asking us about.
Can you get a subsidy for the purchase?
Yes. We are currently able to provide a subsidy of 50 % of the purchase price to private entities whose facilities are located in municipalities with a population of no more than 25,000, provided they meet the additional conditions required to receive the subsidy. In the future, we expect the European subsidy package for the public sector—which will focus on direct energy savings—to be reopened. We are regularly monitoring the situation in this regard.
How does the installation proceed, and will it disrupt my service?
The installation itself is quite quick and simple, however, we always have to consider the local configuration. The individual devices in your operation are connected to the Log-iQ Energy System control system itself using communication cables (power cables remain unchanged). Currently, we are also able to provide a solution that does not require communication cables (no additional wiring needed), where the control system is simply connected only to the existing control panel.
Does it work with my existing appliances?
Yes. Thanks to the patented Log-iQ Module, we are able to connect all devices commonly used in professional kitchens. Furthermore, this includes devices you might encounter in wellness centers or charging stations.
What is the return on investment?
Return on investment varies depending on several factors, such as the size of operation, the number of connected devices, and existing energy consumption. However, based on our experience, the full return on investment period ranges from 1 to 10 years.
What if traffic grows or we renovate?
If you acquire new equipment, we will simply connect it as well. If you are reconstructing operations, the Log-iQ Energy System will be considered in the upcoming modifications by being technically integrated into the new electrical infrastructure. Alternatively, we will reconnect it after the reconstruction is complete, if that route needs to be taken.